Mgc340
Well-Known Member
Mopar W5 heads (new)
Stage 4 port job by SDSS
Reamed 16 guide holes to .500
16 bronze 11/32 valve guides & hone for .0015 oil clearance
5 angle comp valve job
16 oil drains in spring pockets
Resurface for MLS gaskets
Indy 360-3O intake machined to fit W5
Gasket match on Indy intake to W5 rectangle port
2 sets of intake gaskets
AN fitting tapped and installed with braided lines for water flow
Comp Cams 8043-16 roller lifters
Custom Bullet cam
712/720 lift 302/308 dur 108 lobe separation
ARP W5 head studs
PSI CT1240 roller valve springs
CV products X2L-S81SR chrome moly valve locks
Comp cams 4776-16 chrome moly spring locators
SBI 11/32 X .531 valve seals
Ferrea 6000 valves 2.08 int 1.60 ex
Harland Sharp 1.6 roller rockers
Header flanges
Everything is brand new and never been on a block. Only been on plastic block for mock up. Carb, regulator and fuel lines not included.
This is a very nice top end. They don't make these heads anymore! Bolt on your block and race. Very nice castings no porosities at all. Serious offers only. (Firm on price) I'm selling these for less then I have in them.
I have flow numbers and receipts
$6000.00 firm. Pm me or call me for details
Stage 4 port job by SDSS
Reamed 16 guide holes to .500
16 bronze 11/32 valve guides & hone for .0015 oil clearance
5 angle comp valve job
16 oil drains in spring pockets
Resurface for MLS gaskets
Indy 360-3O intake machined to fit W5
Gasket match on Indy intake to W5 rectangle port
2 sets of intake gaskets
AN fitting tapped and installed with braided lines for water flow
Comp Cams 8043-16 roller lifters
Custom Bullet cam
712/720 lift 302/308 dur 108 lobe separation
ARP W5 head studs
PSI CT1240 roller valve springs
CV products X2L-S81SR chrome moly valve locks
Comp cams 4776-16 chrome moly spring locators
SBI 11/32 X .531 valve seals
Ferrea 6000 valves 2.08 int 1.60 ex
Harland Sharp 1.6 roller rockers
Header flanges
Everything is brand new and never been on a block. Only been on plastic block for mock up. Carb, regulator and fuel lines not included.
This is a very nice top end. They don't make these heads anymore! Bolt on your block and race. Very nice castings no porosities at all. Serious offers only. (Firm on price) I'm selling these for less then I have in them.
I have flow numbers and receipts
$6000.00 firm. Pm me or call me for details
