[SOLD] More clean outs

-
Status
Not open for further replies.

Sedanman

67-9 Valiant specialist
Joined
Apr 3, 2009
Messages
8,544
Reaction score
599
Location
chicago Il
Rating - 100%
37   0   0
Contact seller
I've been going through all of my spare parts boxes as I get closer to finishing my car & here is a new list of stuff I've found. I have very limited time off,no real box supplies & it would be great to make 1 package deal for it all over piece by piece.
 

Attachments

more
 

Attachments

Some more
 

Attachments

A few more
 

Attachments

Last batch for a while. This is a 69 & up tan dash pad in driver quality shape & has some cracks (see pics) $100 & prefer pick up
 

Attachments

I would like to get the little heater hose support.
Flat rate boxes are free at USPS
 
I'll take the bolt assortment from post #2 pic 5.

Also the throttle stud from post #4 pic 3 and the spare tire holddown from post #4 pic 2.
 
I want the copper oil line,the oil fill tube and the glove compartment light.Pm me how much and how much to ship to 19355. Mark
 
Interested in:
soff seal hood to cowl seal. does it have the mounting clips? looking to put it on my 70 dart?
Heater hose support, if not sold.
brake pedal pushrod
spare tire hold down if not sold
pic 17, map light maybe??
 

It's 1 pm & I just got off of work. I will reply tomorrow,sorry. I start at 10pm until finished. I recieved an email saying to become a gold member or a vendor to continue to sell anything from here on. I don't remember this rule when I signed up almost 10 years ago. I'm not a buisness,just a mopar hoarder cleaning out my garage. Any input would be great Thanks
 
I am interested in post #2 pic 6 corners and ash tray in post #4 pic 5 PM me and let me know how much
 
I am in need of a few things that I will trade for :). I need the long brake booster support bracket that goes to the firewall, black 8mm plug wires with 45 or 90 ends (off the top of my head)
 
The black round plug is a 68 only dash cigar lighter delete plug for a plane jane car.
 
Sorry I didn't add prices earlier I only had had 6 hours sleep in 2 days when I posted the ad.

BB spool motor mounts $40

VDO guages with oil line fittings for all mopar engines $50

Copper oil guage tubing with fittings (new) $20

70 & up small block pulleys non a/c with PS with alt brackets & bolts $75

single groove 70 & up crank pulley for man steer (offer) I think it is from my 73 340

sofft seal hood to cowl seal for 67-76 a bodies (new) I think I $50 for it (offer)

manual brake push rod $20

66 & under t sig arm (nice chrome) $10

fan spacer $5

67-72 v8 throttle cable with clips $20

drip rail chrome corners $10 per set

headliner bow retainers

misc pkg #1 valve cover oil cap,dash to body rubber fillers,rad cap (offer)

67-9 Plymouth plane jane horn button $20

Misc pkg #2 axel vent,inspection cover for 904 splas shield,glv box light (offer)

Valiant 100 emblems (driver quality) (offer)

fender support brackets for 67-2 a bodies $20

Auto Guage 2300 tach $20
http://www.summitracing.com/parts/atm-2300

Pair of chrome valve cover plug wire retainers,worked great with my MT valve covers I had (offer)

misc pkg #3 : headlight switch,air cleaner stud,3 brake switches,carb bolt,oil cap for valve cover oil tube,PB intake fitting,plastic wire protector for the starter relay, (offer)

Carb bolt (offer)

66-76 Console ash tray,door slider parts,nuts & shifter button spring $30

Washer bottle $20 not brittle,unsure if pump works

68 only dash cigar lighter delete plug,black (offer)

used ARP header bolts (offer)

http://www.forabodiesonly.com/mopar/showthread.php?t=209713
 
Will not seperate the brackets from the pulleys,sorry. It all came from the same engine
 
I have a a few parts wanted ads up if you have what I need & want to trade :)

need a painted gas cap with good rubber for my 67 too
 
Status
Not open for further replies.
-
Back
Top Bottom