74 Slant Six
Well-Known Member
Got the car home and performed the MSD check test and I do have spark from the unit. I'll hook up the blue wire from the old ballast with a different distrubutor and try it.
Got the car home and performed the MSD check test and I do have spark from the unit. I'll hook up the blue wire from the old ballast with a different distrubutor and try it.
Steve,Just put the blue/brown and red MSD wire together.
The brown wire I'm using has power in the run pos. it was the old coil pos. wire. It runs from the two wires that are seperate from the bulkhead going thru the firewall.No, brown is start, Blue is run. It will have power only when key is on.
The brown wire I'm using has power in the run pos. it was the old coil pos. wire. It runs from the two wires that are seperate from the bulkhead going thru the firewall.
The brown wire and blue wire should be in either side of the thick black wire in the bulkhead. These wires come from the ignition switch.
Fuel is fine and not flooded I'm done for the night and I will try it again in the morning.How's the fuel? flooded?