The TTI head pipes fit pretty good. Had to do a little clearance work. Very few options on an A body with a 4-speed.
My 1st real A-body
- Thread starter moparmarks
- Start date
-
plymouth67
It be a lot cooler if you did...
Your car looks GREAT!! Nice work!!
Built up some leaf springs.
Got the rear done for now. Car is mini tubed with inboard springs so later I'll narrow a C body rear and get wider rims. Then this rear in going in another car I have.
These are the MBM disc.
Has 742 case with 3.55 SG.
Got the rear done for now. Car is mini tubed with inboard springs so later I'll narrow a C body rear and get wider rims. Then this rear in going in another car I have.
These are the MBM disc.
Has 742 case with 3.55 SG.
Got my dash finished up. I modified a nice 72 harness.
Head unit with 2 amps. Sub in the trunk.
Carpet, headliner and shifter are in.
I'm using the 72-4 E body sport wheel. Can see all the gauges. Wanted to use a Tuff wheel but not with the 16:1 manual box.
The dash pad and arm rest are from Bob at ABCMoparts. Nice stuff.
Head unit with 2 amps. Sub in the trunk.
Carpet, headliner and shifter are in.
I'm using the 72-4 E body sport wheel. Can see all the gauges. Wanted to use a Tuff wheel but not with the 16:1 manual box.
The dash pad and arm rest are from Bob at ABCMoparts. Nice stuff.
Last edited:
Finished up the doors panels. Adjusted the glass. Doors shut like a Rolls.
Got plates and insurance so getting close to driving it.
So I just need to install the W/S and rear glass. Finish the exhaust and get some rear tires and I'm driving it.
Still trying to decide what I want for buckets. Have 70-1 and 71-2 sets but thinking I want later model seats. Something real nice.
Have learned a lot from the great people on here.
So I just need to install the W/S and rear glass. Finish the exhaust and get some rear tires and I'm driving it.
Still trying to decide what I want for buckets. Have 70-1 and 71-2 sets but thinking I want later model seats. Something real nice.
Have learned a lot from the great people on here.
This weekend I installed the fender strut bars from a 75 Dart.
Also changed out the biscuit style tranny mount to this big O' honkin spool mount.
Not much "correct" about this 72 Dart.
Also changed out the biscuit style tranny mount to this big O' honkin spool mount.
Not much "correct" about this 72 Dart.
-
