[Found!] Need 318 Crank Pulley

[JeffreysDart]

Hi All
I am running a 70 318 with a cast iron water pump and i am in need of a 2 groove crank pulley. i am running power steering. hopefully someone can set me up with one and i can drop her in! 67 cuda notch! see pics

-Jeff

 

[pishta]

shoot some specs I may have something. Center of closest groove to flange would work. Im sure the groove to groove is a constant.

B/RB double lower pulley cut from a quad. 2" deep pulleys at 1-1/4 and 1-3/4 $5
A triple lower symmetrical bolts 3-3/4 deep pulleys at 1-7/8, 2-5/8, 3-3/8 $5

 

[JeffreysDart]

shoot some specs I may have something. Center of closest groove to flange would work. Im sure the groove to groove is a constant.

B/RB double lower pulley cut from a quad. 2" deep pulleys at 1-1/4 and 1-3/4 $5
A triple lower symmetrical bolts 3-3/4 deep pulleys at 1-7/8, 2-5/8, 3-3/8 $5

I am sorry i am so confused.....

 

[pishta]

the pulley depth is the total height of the pulley from lip to mounting flange. The other numbers are where the groove is for the belts off the mounting flange. So the triple I have is 3-3/4 tall, with the first groove at 1 7/8 from the flange, etc.

 

[Pnypwr]

I should have one from a 69 message me if your interested

 

[JeffreysDart]

thanks all, some came through with one.