Need Photo ('s) please!

[DesertRat]

I am putting my 4 piston KH calipers together and have to replace all the hard lines. I have the ones I took off but cannot figure how to bend new ones & plumb them. For each side there is a plain tube and a wrapped tube. Any help much appreciated. I have the book but it is not real clear.
Thanks, Rat

 

[abodyjoe]

download this... http://www.abodyjoe.com/pictures/Misc. car info/69 dodge service manual.pdf


then goto page 5-30 and see if that helps any...

 

[DesertRat]

Thanks Joe, wont let me in. Went to homepage but it is huge. Thanks for offering.
DR

 

[abodyjoe]

right click th elink. then click on "save link as" then download it.. its a 69 service manual. yes its a big file.

 

[DesertRat]

I am doing the mustang LBP disc mod to my setup. Going to mock it up tonight to see if my machinest got it right, If it looks good, I will paint the calipers body color. I have the 67 manual but the section on KH is not real clear. Thanks, Rat

 

[hemi71x]

When i need hard lines for the calipers that i rebuild, i buy them from Fine Lines.

Look at this link.

http://www.finelinesinc.com/catalog/product_info.php?cPath=279_499&products_id=4483