wwsmith77831
Member
Hello Mopar A Bodies. I was building a 408 to put on my '96 RAM until I came across a '70 Dart Demon. Now my plans have changed. Hopefully I can get a lot of help from this forum. Putting a Magnum 408 in a Dart
new member
- Thread starter wwsmith77831
- Start date
-
n.y.340 dart
Well-Known Member
Sounds like a great combo. It will run awesome.
Welcome to FABO!!
You'll find lots and lots of info in the threads. If you can't find something, there are a lot of very knowledgeable folks here willing to help.
You'll find lots and lots of info in the threads. If you can't find something, there are a lot of very knowledgeable folks here willing to help.
1969VADart
Well-Known Member
Welcome from Fredericksburg, VA.
Welcome,that 408 will scoot,in a Mopar A body.
Love the Demons - and a 408 will make it pretty evil 
GEO
Sarcasm Inc.
Welcome
Dartnut
Don't hate me because i'm beautiful
Welcome to FABO!
BTW, they didn't make Demons until the '71 model year.
I take it that it was one of the early build cars for the '71 model year built after the middle of August, 1970, and that's why you think it's a '70?
BTW, they didn't make Demons until the '71 model year.
I take it that it was one of the early build cars for the '71 model year built after the middle of August, 1970, and that's why you think it's a '70?
wwsmith77831
Member
Thanks for all the replies. I checked my VIN and found that the car is a base Dart not a Demon, but I'm still anxious to get started on this project and look forward to help from the A bodies only site.
-
