Not sure this intake will feed 600 hp

[MOPARMAGA]

You might make 600 with that intake.....


with a pair of 150hp plate units under the carbs.....



maybe.

I really think those carbs are negative HP carbs.
Dude oughta consult with some folks before he buys stuff especially that because it wasn't cheap

 

[JC71340]

Definitely needs a 3/4 Race Cam.

Hahahahaha!!!

 

[Brooks James]

4waaLol yeahs W

Just saw: EQ has a set on new CH318A magnum heads drilled for the LA manifold bolt pattern that flow 227 CFM @.500 on intake
Under $900

 

[MOPARMAGA]

Just saw: EQ has a set on new CH318A magnum heads drilled for the LA manifold bolt pattern that flow 227 CFM @.500 on intake
Under $900

Where did you find those?
I just rebuilt a set from Clearwater I think, be careful if they have longer valves than stock you'll run into much more than you want.
If they're stock valve length then that's good.
That's not a bad price.

 

[la360]

It probably won't make much over 500 hp

Are these the heads you are using?

Chrysler Dodge Magnum 318 / 360 1992 - 2004 Cylinder Heads, Assembled (Pair) - EQ Cores & Recycling

Replaces Casting Numbers: 53005714, 53006671, 53020466, 53020468, 172CC Intake Runner / 62CC Combustion Chamber - ASSEMBLED. Made from the highest grade cast iron.

enginequest.com