[WANTED] OD bell housing

[barracudakid]

What is the casting number on an
4 speed OD transmission bell housing?
Thanks

 

[volaredon]

/6 or v8

 

[barracudakid]

Not sure
Post both if you can

 

[volaredon]

What engine are you wanting to put it behind
The /6 is easy. The starter pocket is up high

 

[MOPAROFFICIAL]

If you can't find one, measure the retainer and have the Bell machined bigger with about .002 interference/ smaller

 

[halfafish]

I have both versions of this BH. I can get numbers in a day or two when I get a chance to dig them out.

 

[barracudakid]

I am looking to buy a bell housing
I am trying to find out exactly what it is
The guy said it is an OD part
I am not up on these parts

 

[volaredon]

There was a different version for the later years of these trucks that had provisions for a hydraulic slave cylinder. I have this one for a slant 6 in the shed but it's currently buried

 

[barracudakid]

The one I am looking at is local
It’s the only one I am interested in

 

[Dartn440]

https://musclecardata.com/wp-content/uploads/2021/01/Mopar-Transmission-Bellhousing-Part-Numbers-and-Casting-Numbers.pdf

 

[barracudakid]

Thanks
That’s a great chart

 

[Dartn440]

I bought a couple truckloads of parts. Needed it to ID bellhousings.

 

[halfafish]

I found the first one, the BH for a slant to 833OD. It's a little hard to read due to casting issues, but it looks like the number is 3713643. LMK if you need the number off the V-8 version. It will take some digging to at it.

 

[barracudakid]

I found the first one, the BH for a slant to 833OD. It's a little hard to read due to casting issues, but it looks like the number is 3713643. LMK if you need the number off the V-8 version. It will take some digging to at it.

I am good but thanks!