[SOLD] OEM 360 cast crank, casting number 3418640, .010/.010

[physixx]

I have for sale a really nice OEM 360 cast crank, casting number 3418640. This crank was in a 360 block with a 1971 casting date. This is very clean with the rods and main journals already cut .010/.010. The only thing that this might need is a very light polish. Other than that, it needs nothing. At some point though, this crank was balanced as Mallory metal was installed in the last counter weight as seen in the pics. No heavy metal at the front though. Neutral balance converter and standard offset weight front balancer perhaps? Additionally, the oiling holes have been chamfered so better bearing oiling. I would like to get $100.00 for the crank plus the shipping. This is a heavy piece so the shipping will be crazy. Local pickup would be great or depending on location, I can meet part way for the cost of fuel and any tolls.

Ken
Edison, NJ

 

[oldkimmer]

Can a shop tell if it’s zero balanced and what the bob weight it would need. Thanks. Kim

 

[physixx]

Hi Kim. I believe that can be done. The rods were the OEM rods and the pistons were the Silv-O-Lites that I have posted in another thread. Once those weights are known, it’s just a matter of spinning the crank with the weights added.

 

[physixx]

$90.00 plus shipping or meet part way for the cost of fuel and any tolls?

 

[physixx]

$80.00 plus shipping or meet part way for the cost of fuel and any tolls?