oil on intake

[Snake]

Hi guyssss,Wondering if any of you have had oil on your intake after a few good revesssss.I have a 360 mild cam headers good heads and Edelbrock intake.Oil seeps up near 4&6 and 3&5 runners on my intake.The gasgets are 2 years old Felpro to boot.Have tryed tinghting the intake its not loose.So what gives is this normal? Any tips could be very helpfull.And for thoes who can cruise right now do a burn out for us Canadianssss who cant.cabin feaver is runnind BAD.Thanks Don.:snakeman:

 

[MtNemoMopar]

Is there sealant on your intake bolts? Are the valve cover gaskets maybe the culprit also?

 

[AdamR]

I would replace t he intake gaskets and spray them with some copper coat before putting them on.

 

[OldVart]

MtNemo probably has the correct answer. If you don't put sealer your intake bolts, oil will wick up the threads and onto the manifold. Makes a hell of a mess.

 

[speedyb-cc]

Yea mine did the same thing, siliconed the bolts, no more oil.

 

[Snake]

All right sealent it will be ,man a simple fix.I have not tryed sealent on thoes threads befor.Thanksssssssss .