Original big block 383 4 speeds

[crycho]

did the 4 speeds have a clutch fan or just the fan with a spacer?

 

[LovetheA's]

did the 4 speeds have a clutch fan or just the fan with a spacer?

I believe big block a body's came with a solid fan with spacer. If I'm not correct I'm sure others will chime in.

 

[bOb shingler]

no space for a clutch type.

 

[crycho]

no space for a clutch type.

ok thanks guys, does anyone have the correct spacer, the 2 3/8 is too long?

 

[Daves69]

MP recommends a minimum of 3/4" between. You should be able to determine "what would work" from there if you cannot latch on to the original pieces.

 

[66fs]

There is a short /6 one that should work. Definitely short on space.

 

[moper]

I think I used the std 3/4"(?) spacer from early non-ac cars...

 

[bOb shingler]

just make sure you have 3/4" to 1" space blade tip to radiator.

 

[crycho]

I tried the standard 2 3/8 and was 'way' to close. I found a 3/4 at the Nats. I'm sure this will work. thanks for all the feedback GENTS!