Jan 26, 2012 #1 A alg Well-Known Member Joined Dec 22, 2011 Messages 89 Reaction score 6 Location florida any suggestions on how to install the over center spring on a 71 demon? i had to replace the bushings and sleeve. thanks al graham
any suggestions on how to install the over center spring on a 71 demon? i had to replace the bushings and sleeve. thanks al graham
Jan 26, 2012 #2 E ewolfe Well-Known Member Joined Oct 27, 2010 Messages 47 Reaction score 2 Location Kentucky Just bend it, add a washer and repeat. Do this until it's long enough with the washers pinched in to connect, but press and all the washers will drop out.
Just bend it, add a washer and repeat. Do this until it's long enough with the washers pinched in to connect, but press and all the washers will drop out.
Jan 26, 2012 #3 green1 Well-Known Member Joined Dec 6, 2008 Messages 4,639 Reaction score 68 Location Orange Park, Fla correct, just keep adding washers/spacers. Otherwise, it will hurt you big time.
