[FOR SALE] Over center spring for 4 speed clutch pedal 1 Heavy Duty 1 Standard

-
Status
Not open for further replies.

jtkaaa07

BossMan
Joined
Oct 25, 2010
Messages
2,067
Reaction score
749
Location
Neenah Wisconsin
Rating - 100%
21   0   0
Contact seller
As the title states, I have 2 over center return springs for a Mopar A body , one is a HD style spring and mount, and one is standard duty with mounting clip. Asking $45 plus ride for standard spring, and $75 plus ride for the HD spring and mount. All parts were bead blasted clean and painted, ready to use and in excellent condition. You can see the difference between the HD and standard in last pic, standard is on left and HD on right. Located in central Wisconsin.

Thanks Jeff

thumbnail (2).jpg


thumbnail.jpg


thumbnail (3).jpg
 
Hi Jeff,
I may be interested in this but have 2 questions...I was told I needed to replace my bracket since the clutch pedal has trouble fully returning (I have to pull it up with the top of my foot, then it pops up) I haven't looked at it closely, but if that shaft on mine has a wear groove, it could be the culprit, especially since another spring didn't help much.
I can't see the other side of yours, is the shaft smooth all the way around?
Wondering how much of a job it is to swap it out? Was told I may have to pull dash. I have a stock 69 GTS w a 383.
What do you think?
Thanks,
Joe
 
Joe here’s some better pics of my pin, groove is even all the way around as it should be. I’ve seen the mounting brackets get the holes slopped out of round which is a possibility as well. Holes should not be out of round. As far as swapping it out, it’s not a horrible bad project, I would drop the column and take the pedal assembly out, much easier to work on it that way

Jeff

1131EB27-EFA4-4B8B-9E92-DD85040A25E4.jpeg


50D1461F-6FE3-4216-91AB-4B8FC87F84AE.jpeg


020D9D40-565A-436F-AEA8-763535E62EF2.jpeg
 
Joey-the overcenter spring helps grandma push the pedal down, and is for borg + beck pressure plates. when I went to a Long plate I needed to tap the pedal to get it fully returned - cut off the spring and now all good
 

Status
Not open for further replies.
-
Back
Top Bottom