You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
P/s Pulley
- Thread starter JBAR
- Start date
-
1966 dart wagon
Well-Known Member
you have to get a power steering pulley puller, or just some kind of special puller, i used one to get my pulley off when i rebuilt the pump
xwaynestaticx03
Well-Known Member
harbor freight sells a cheap pulley remover kit, worked good enough to change the pulley on my dussters p/s pump...
MoparBrit
HillingdonDart
If you have an Autozone close you might check to see if they have a puller in the loaner tool section. If I remember right, you buy the tool, use it and have so long to take it back and they will refund you the price of the tool. Failing that you might call some of the large chain parts stores and see if they have a puller that they use in the store and if they will pull it for you. Old parts chain I used to work at did have them under the counter as sold PS pumps with no pulley. Customer would bring the core pump in and we'd swap the pulley over for them.
Best of luck!
Best of luck!
Small Block
Well-Known Member
Orielly's has one and not too bad on price and it's a must have tool or you'll tear up the pully.
-
