Painting a steering wheel

-
Old Tired Rebel

Old Tired Rebel

Legandary Member
Legendary Member
Joined
Oct 10, 2009
Messages
12,163
Reaction score
357
Location
NC
I want to repaint my steering wheel that is in my Charger? I want to make sure the paint stays and not peel off.

100_3667-500.jpg
 
Epoxy primer, 2K primer and BC/CC paint.
 

Attachments

  • 000_1083 (600 x 400).jpg
    126.6 KB · Views: 447
Cliff, I just did mine in fact I did my whole column. you can use regular spray any color you want use sem adhesion promoter and 2K clear. Check out my thread.
 
Thanks everyone I will check it out closer after I get home in the morning
 
mopardrt said:
whats 2k clear?
Click to expand...

2k clear coat
comes rght in an aerosol can with the activator already in
their. Make sure you where a respirator when you spray it
it has some nasty chemicals in it. You can get it through Eastwood.
about $20 A can good stuff!
 
I've heard of people spraying Plasti-Dip on the steering wheel but I don't know how it holds up. The good part is that it's about 5 dollars a can at Home Depot and it peels off in a sheet once you don't want it anymore. It might be a good fix until you can figure out a good way to paint it.
 
Tina said:
I've heard of people spraying Plasti-Dip on the steering wheel but I don't know how it holds up. The good part is that it's about 5 dollars a can at Home Depot and it peels off in a sheet once you don't want it anymore. It might be a good fix until you can figure out a good way to paint it.
Click to expand...


Plasti dip sounds like it will help with extra grip
 
You must log in or register to reply here.
-

Back
Top