[FOR SALE] Parting out 1975 Dart 2-Door

[superbee1970]

I am parting out a 1975 Dart 2-Door. The Disk brakes are already sold.

Let me know what parts you need. Was 6 cyl car. Do have some motor parts as well.

$5.00-$500.00

73-76 should be interchangeable for parts.

Car is located in Southern California.

 

[Johnny Dart]

PM sent.

 

[Nutty runner]

Left driver inner fender.need top half cut above shock tower,below shelf flat and the inner fender to cowl connector belt cut out of the firewall

 

[dartnabout]

I need the rear bumper. What would be total cost to ship to PA

 

[SRT_DSTRHOLC]

brake light switch bracket there?

 

[Prine]

Have any DART emblems?

 

[74Dart318]

pm sent

 

[DartGTDan]

Do you have the gas filler tube, fasteners, and gas cap? How much $ (including shipping to 48044)?

 

[superbee1970]

I have the filler neck and tube. I don't have an original cap. Here are a couple photos. Let me know if interested. $25.00 shipped.

 

[moparwillybb]

whats the taillights like?

 

[superbee1970]

On this car the lenses are broken. I need to check the other 75 Dart I have

 

[srixon4406]

How's the front floor pan? Firewall to the rear seam under the back seat

 

[Dana]

Do you have a drivers side a pillar molding? Thanks

 

[superbee1970]

Sorry. The floors are kind of rusty. Not worth saving.

 

[superbee1970]

I do have a driver side pillar cover. Need to take it off the car to make sure it is isn't broken.

 

[newguy]

What shape is the steering wheel in? It is black, right?

 

[Dana]

Hey pal, have you had a chance to remove that a pillar molding?

 

[plymouth73]

Do you have a-pillar trim for sel? Driver arm rest pad? Door sill plates? Zip is 95354

 

[whiteduster]

dose it have a carpet or the rubber floor covering

 

[Plymsoul1]

still have the seat hinge covers ?

 

[Plymsoul1]

how about the kick panels?

 

[Passingship]

I need a left tail light bezel for my '76 Dodge Dart Custom 4-door (see 1st and 2nd picture). 74-76 Dodge tail light bezels are different depending on whether or not the car has the Dodge nameplate between the tail lights. In the 2nd picture, you can see how the Dodge nameplate overlaps the end of the tail light bezel. The 3rd picture shows how the ends of the bezels differ. Mine is the bottom one, marked “Yes” and as you can see is badly pitted so I am seeking one with very little pitting. I have found a NOS right bezel. Also, my Dodge nameplate has some damage to it (see picture 4) so I would like to find one much better. Do you have a nice left tail light bezel from a car with the Dodge nameplate between the tail lights and do you have a nice Dodge nameplate for between the tail lights? That is the original paint on my car!!!

 

[Plymsoul1]

is the rt upper door panel available? Its plastic. I reside SM calif 90272

 

[75dartron]

PM sent