Parting out 65 Cuda

[BlackBrick]

Okay guys, this Sunday, Gene and I will be starting to take apart a 1965 Cuda 273 4 speed car.

From what I have seen the body is all there, except the 4 speed tunnel. Southwest car so pretty rust free, and I didnt see any down there the last time I was rolling around under it.

As far as I can remember, the car is pretty much all there, including some pretty worn out buckets, so send me you wants or wishes.

Oh and the 273 is not part of this though.

Mike J

 

[Fstforward]

pm sent

 

[Old Tired Rebel]

email Sent.

 

[BlackBrick]

Most emails and pms will be answered tomorrow evening. I will be at the car snapping some pictures and pulling parts off in the AM.

 

[65Cuda273]

PM sent

 

[BlackBrick]

For all that have emailed and requested prices with shipping - I will be posting new pics of the car, and all the parts that are currently available. Didn't do any disassembly on the body, but have tons of parts already loose.

 

[BlackBrick]

Okay, got more pictures and some parts off the car. This is the first time I have parted a car, so if the prices seem out of line, let me know.

Any parts not listed or shown, just PM and ask me about them. I probably have them at Gene's.

Smaller parts will include shipping to lower 48.

Shipping on the large pieces is going to be expensive. Priced shipping a fender with Greyhound, and we are talking almost $100, so keep this in mind when asking about parts. The parts that will have seperate shipping will state "not including shipping". At that point, you get the choice of how it gets shipped. UPS, Fedex, USPS, Greyhound, wagon train, etc.

Description and prices:

A pillar trim, 3 sets, one set has 2 of one side, sun wear and faded.
$40 per set

Bucket seats (2), good frames and springs, sliders are in good shape
$200 not including shipping

66 Center Console, cubby door works, ashtray is there. Chrome top and black sides. (Thx 65cudalover!)
$100 not including shipping

Barracuda door plate, Drip rail moldings
$20

Drivers side grill part (I have 3)
$40

Drivers door - no glass or chrome or guts, just the frame and skin
$100 not including shipping

Driver fender - minor dent, surface rust - solid
$100 not including shipping

 

[BlackBrick]

Parts list continued

Passenger fender - straight and clean
$100 not including shipping

Turn signal marker lights, with pigtails driver quality, lenses have minor cracking
$30 each - 1 SALE PENDING - 1 left

Front arm rests - sun faded, plastic has minor cracks at the mounting holes.
$75 for both - SOLD

Grill - No center emblem, needs to have top tabs re-welded. Chrome is drivers quality
$125

Inner fender housings (both sides) - uncut, surface rust, even under the battery tray
$75 each without shipping
Drivers side SOLD

Interior trim lights - bezels and lenses only, lenses are yellowed
$30

 

[BlackBrick]

Parts continued.

Interior trim parts (all you see)
$40 per set (not sure where it all goes, wasn't there when it was taken off) (top 2 pictures)
$20 per set lower pictures to the underhood shot.

V8 K member - surface rust, straight
$75 not including shipping
$100 with the manual steering box

Front turn signal lights, bezels, and lenses - lenses cracked, with pigtails
$80 - SALE PENDING

Back Arm rests - ashtrays are there, but rusty. Black pads with greenish housings.
$50

 

[BlackBrick]

Parts Continued

Rear interior window trim
$40

Rear window Chrome - not heavily pitted, good driver quality
$75

Driver side remote mirror. The end control tabs are connected, not cut Functional - I'll throw in one with cut cable ends. Good to rebuild one.
$50

Passenger side tail light housing - driver quality - no lenses.
$50

Rear Seat back holders? Drivers quality
$30 a set - 1 SET SALE PENDING - 1 set still available

rear Seat back board - Chrome trim included
$100 not including shipping

Rear Seat trim
$40

 

[BlackBrick]

Parts continued

Tail light lens - cracked, drivers quality
$30

Tail light bezels - drivers quality
$75

Tail light Bezels - heavily pitted
$40

Tail light bezels with lenses - lenses are cracked, chrome is driver quality (three pictures)
$100

Trunk prop rod - fully functional, still holds weight
$35 - SALE PENDING

Under dash AC unit - not known if it is functional
$75 not including shipping

Front Valance - Dinged up on the drivers side. Can be straightened out
$50 not including shipping

Valiant grill center section - Emblem is in great shape, some of the fins are a little bent. Good drivers quality.
$100 not including shipping

 

[BlackBrick]

Damn, finally done with this series of posts......

Hood - pretty straight, name plate attached - minor dents and dings
$100 not including shipping

Trunk lid - pretty straight
$100 not including shipping

Back windshield - in good shape, no cracks, no rubber trim - gonna be a ***** to ship.
$400 not including shipping

 

[66340SEDAN]

PM sent

 

[BlackBrick]

Responded

 

[sab1]

interested in grill and bezels and the chrome between back glass and trunk how much

 

[azmopar]

does it have an antanae?

 

[BlackBrick]

@azmopar - no antennae that I saw. i will check when I am back out there this weekend.

 

[BlackBrick]

Sab1 - pm sent

 

[65cudalover]

That center console is from a 66, 65 was short with no cubbie. I had a 66 and now a 65 and have that console in my shed. FYI

 

[azmopar]

@azmopar - no antennae that I saw. i will check when I am back out there this weekend.

cool thanks lmk i just need the mast and the base :headbang: no need for the bezel or the nut

 

[BlackBrick]

@azmopar - Let me check tonight and I will let you know. If you want to swing by and pull or cut anything off, let me know. Car is in Laveen.

@65cudalover - noted and updated. Culd have swore Gene took this out of his 65.....lols

 

[65Valiant310]

Do the control arms have swaybar tabs?
let me know, thanks

 

[BlackBrick]

@ 65Valiant310 - pm sent

 

[chaps70rt]

Are the chrome or stainless strips with the holes for the interior where the carpet meets the rockers?? IF so, are they still for sale?

Thanks ... Gary

 

[illcuda65]

Do you have the hinge for the "Trap door" trunk separator?