1500swinger
it's for sale not on sale
Can anyone tell me how to identify a passon trans vs a stock factory one?
Passon A body aluminum 833
- Thread starter 1500swinger
- Start date
-
Yeah if it doesn't work, makes noises and is a total POS shifting through the gears, it's probably a Passon.
1500swinger
it's for sale not on sale
How about telling me the difference when they are both on the floor.
- Joined
- Apr 16, 2009
- Messages
- 6,266
- Reaction score
- 9,370
What is the front bearing retainer size? or O.D.?
I am assuming this is for an A body?
What is the size of the output shaft? 904 splines or 727 size?
I must ask, you posted in "Gold Member Discussions"?
1500swinger
it's for sale not on sale
No idea what I'm doin...lol.
1500swinger
it's for sale not on sale
Now I have a bit of homework.. and yes a body.
I can help!
- Joined
- Apr 16, 2009
- Messages
- 6,266
- Reaction score
- 9,370
Move the tread and take me with it.
You posted this in the wrong place,
Start by measuring across the largest part of the bearing retainer on the front of the tranny. The bearing retainer is right behind the Clutch and the part the throw-out bearing rides on. Lets see some pictures.
You posted this in the wrong place,
Start by measuring across the largest part of the bearing retainer on the front of the tranny. The bearing retainer is right behind the Clutch and the part the throw-out bearing rides on. Lets see some pictures.
1500swinger
it's for sale not on sale
I do know what a bearing retainer is, I don't know how to move thread. Pics tomorrow. Just trying to figure out what I have before posting for sale on FABO.
You might post a picture of what you have, and we could take a gander.
I am no expert, but i was unaware of passon having a 4 sp aluminum trans.
I am no expert, but i was unaware of passon having a 4 sp aluminum trans.
1500swinger
it's for sale not on sale
You may very well be right...ii just assumed the aluminum 833's were the only 833 OD
Post a pic and retainer measurement and i bet someone will know.
Passon made his own Aluminum main housings and tail shaft housings. The ones I have, have his logo on the castings. They came small and large front bearing. If it looks like a standard housing, vin pad and all, it is probably an O/D unit with a large front bearing and a 5 1/8 OD front bearing retainer.
And still no pics. Tomorrow never comes.
Im guessing A body OD unit. Usually one knows when one has $3500 in trans vs $500 in trans......but....ya never know!
- Joined
- Apr 16, 2009
- Messages
- 6,266
- Reaction score
- 9,370
And if he has a set of main caps and who he sells them to?
1500swinger
it's for sale not on sale
The transmission was posted for sale with pics. This was my first time posing a question and I guess I shouldn't have posted in gold member area.
-
Similar threads
- Locked
