Earlie A
Well-Known Member
Looking for a pair of Edelbrock or Speedmaster small block Mopar heads ported by @pittsburghracer. Prefer 2.08 valve size, but would also consider 2.055.
PBR Small Block Heads
- Thread starter Earlie A
- Start date
-
-Boosted-
Hard Member
I thought there was a set up for sale recently?
Earlie A
Well-Known Member
There was. Not his normal specs on that set.
Earlie A
Well-Known Member
Still looking for a set of John's heads. This could be a purchase or a borrow/loan situation. John had a lot of success porting the Edelbrock and Speedmaster style heads. Ultimately I would like to test the heads on my bench against other similar heads and perhaps get them on a dyno to see how they compare. If you have a set or have interest in seeing the results or learning more about my intentions, please send a PM.
Knowing John, I bet most of his ported heads are in use.
I'd be very interested to see how they compare to other ported versions.
I'd be very interested to see how they compare to other ported versions.
Earlie A
Well-Known Member
I agree. It may be a big of a long shot, but we’ll see what happens. I think it was @Mean416 that mentioned how nice it would be to get a CNC program made from John’s ports to keep them available. If the owner of a set of his heads wants to do that I would like to help make it happen.
Earlie A
Well-Known Member
I’ve heard the term sticky, but never tried to figure out what it is. Educate me please.
It's the yellow section at the top of each subject where posts have been saved for easy access cause they never be buried.
Since He has been given Legendary Member status, His PM's are locked/closed, & neither of His Sons have reached out to this site TMK. I was under the impression that He had some Member's projects unfinished, but I could be mistaken. Unfortunately, Stickies get looked past quite often. So while the thread won't get buried, it may not get noticed, may be better to keep posting now & then in the Pittsburghracer Gone thread.
@toolmanmike Opinions?
@toolmanmike Opinions?
Maybe @rumblefish360 ?
Maybe me what? Have a set of PBR heads?
That’s a “NO” from me sorry, I don’t have a set.
He ported a M1 single for me. That’s it.
I was under the impression this was to flow/dyno-test & model it for reference/documentation's sake. I suppose if purchasing one was the only option, & the OP was willing, then it may result in a sale. Plus, IIRC, this allowed it to get 'bumped' w/o running afoul of the sale/wanted rules.
One of His Sons posted on here to sell some of His stuff, did You make contact with Him then???
Earlie A
Well-Known Member
I did. Never heard back.
Earlie A
Well-Known Member
All/any of the above are options. Main intent is to dyno test in comparison with other available options. Loan/borrow situation would be great but so would a purchase situation.
I think it would be stellar to digitize for a CNC
Cuda416
Well-Known Member
Or even make an STL available for modeling.
Earlie A
Well-Known Member
I have heard that one of his sons is working on this?????
-
Similar threads
