I have about 25,000 miles on a small block TCI StreetFighter 727 I have been using in my ‘67 Barracuda since ‘92. I dropped the pan today, had a little gray sludge at the bottom but more concerning was the piece of metal I found. Along with this long piece, one inch length, were about three smaller pieces, 1/8” diameter, in the pan.
The most I have done with the innards of this, or any tranny, is removing the pump to replace a seal and swapping fluid and filters so I have no idea what this piece could be from, a bushing maybe?
The tranny shifts and operates fine. Any input would be appreciated, it seems I have a rebuild in my immediate future and the damage may be immediately apparent once apart.
Thanks
The most I have done with the innards of this, or any tranny, is removing the pump to replace a seal and swapping fluid and filters so I have no idea what this piece could be from, a bushing maybe?
The tranny shifts and operates fine. Any input would be appreciated, it seems I have a rebuild in my immediate future and the damage may be immediately apparent once apart.
Thanks















