Pillar mounted tach and gauges

[Landon]

Has anyone mounted their tach and gauges on the pillar? Post pics of your gauge pods and tach set ups

 

[inkjunkie]

If you have a cage Auto Meter sells the pieces to mount gauges to it....

 

[gilgalad1138]

I have a Sunpro super tach mounted to my A pillar. I used one of the trim mounting screws through the base. No mods required, and it works great. I can get pictures tomorrow, if you would like.

 

[BP27]

Here is what I have

 

[74DartSwinger360]

I mounted mine using the same screw used to mount a pillar trim. Flattened the mount that would make it mount on top of the steering column.

 

[66durgederp]

i know this thread is old, but maybe someone else may have interest they just dont know it yet ;) time to revive it! made my own gauge mounts for my 66. went to radioshack and picked me up a couple 130 degree LED's so i wont have to tear this apart ever again to change a bulb. ill be running mechanical water temp and oil pressure gauges in mine. didnt turn out half bad!

 

[74DartSwinger360]

Those are really nice. Got a pic from the drivers seat?

 

[66durgederp]

thank you! not yet, its was 11 degrees today.....wasnt diggin the idea of sitting under the dash stringing wires and copper tubing....haha when i do though ill post em.

 

[66durgederp]

74dartswinger360 here ya go!!!

 

[hemitheus]

someone on here made one from an early s10 work

 

[66durgederp]

i was reading bout that, however i wanted this on the cheap, this mold was 8 bucks through work, and i had everything else to make it work. cant pass that up!