[WANTED] Piston ring!!!!

-
Status
Not open for further replies.
71Scamper

71Scamper

Mopar runs thru my veins!
Joined
Feb 5, 2013
Messages
1,309
Reaction score
73
Location
Kingston, NH
Rating - 100%
18   0   0
Contact seller
I get all my pistons in except #8 and I broke the second ring. This is a long shot but I need a single ring meant for the second groove from a mopar performance 4.070 ring set. This would be a .030 over bore 340.
 
Back in the 70-80's you could buy a set of rings for one piston from sealed power. I don't know if you can buy them like that anymore.
 
you can but I would have to wait 2 weeks for summit to get it in from sealed power then send it out to me. Also, the set I have is Mopar Performance, so I'm not sure if the rings are made the same.
 
mp does not make rings...they buy from vendors like sealed power....

basically you are looking for a 4.07 5/64 thick...ductile iron ring....
 
I know i have a full set...would have to look and see what partial sets sizes I have...

will look in morning at the shop....
 
I wonder if you can get a single Sealed Power set from Napa. If you have one nearby, I'd stop in & chat with them.
 
Status
Not open for further replies.
-

Back
Top