Power Nation's 410 Stroker W/ Trickflow Induction

-
I like that they were able to make it run on pump gas with streetable power. I think that was their intent. Not a full out race engine, but showing what the Trick Flow top end can do on a basic stroked Magnum. Something I am interested do to that 41 Plymouth in my avatar. Just a healthy street engine, with good manners, run pump gas and won't overheat at idle or need a crazy high stall converter if going with an automatic.
 
Last edited:
Nat said:
so it made a little less than my 426 stroked 360 with edelcrap heads and a smaller cam , colour me not inmpressed
Click to expand...
Where is that? I have big doubts about your claim with as cast edelbrock heads making that power.
 
Looks like the hydraulic roller lifter kind of gave up after 5,200 rpm, the 1.6 rockers didn't help those lifters, wonder what the numbers would have been with a solid roller? all those pens, markers, and steel rulers in their pockets must add a few HP.
 
You must log in or register to reply here.
-

Back
Top