Power steering pulley

[John H.]

Have 1967 dart gt conv. 225 slant six. Need power steering pulley. Fell on floor and bent. Any ideas were.

 

[Badvert65]

Do you need the pump pulley or the crank pulley?

 

[John H.]

Pump pulley

 

[slantsixdan]

You're going to have to specify Thompson (round filler neck) or Saginaw (oval filler neck) steering pump -- post a pic of your pump if you're not sure.

 

[John H.]

Round

 

[toolmanmike]

I don't know that anyone repops them so new pullies are out. You will need to start a parts wanted thread for a used one.

 

[John H.]

Thanks.

 

[slantsixdan]

That's not a '65-type Thompson pump, it looks like a later ('70s) Federal item. If we were talking about an original-type Thompson pump, I'd say that looks like the dished pulley for cars with A/C; cars without A/C had a flatter pulley.

'73 factory parts cattledog confirms that just like in '65, the pulley for the Federal pump used with A/C has a different part number than the without A/C.
Pulley part numbers are different in '65 than in '73, but that doesn't tell us anything about yes/no on interchange. You're probably going to have to do a careful visual/measurement match-up to get the pulley you need. You might check with Steer & Gear or Firm Feel to see if they might have the pulley you need.

 

[townsend]

There should be a seven digit part number stamped on the pulley. May have to look carefully to find it. Then post the number.

 

[John H.]

can’t find number on pulley. My car has factory air