[WANTED] Power steering pulley

[John H.]

Need power steering pulley for 1967 dart gt conv with a/c.

 

[barracudakid]

I have a pump with pulley

 

[John H.]

can you send picture. Does it look like this one. Price ?

 

[barracudakid]

Info tomorrow

 

[John H.]

Thanks

 

[John H.]

Here is picture of pump and pulley

 

[barracudakid]

Pics

 

[John H.]

Don’t think this will work. Pulley looks different. Thanks for the pictures.

 

[barracudakid]

AC may change it
I just did not pay attention

 

[John H.]

I think so.

 

[townsend]

Don't know if it will help, but here's some info on the power steering pulley.
Chrysler part # 2128578 is pulley without AC, belt length from Gates is 39 1/8 inches.
Chrysler part # 2268665 is pulley with AC, belt length from Gates is 36 1/8 inches. Pulley with AC was used from 1963 thru 1968.
Might help if you could post the diameter and height of pulley.

 

[John H.]

Diameter is 5 3/8 Height is 2 1/4. Bore is 5/8. These are approximate. Checked with dealer and part #2268665 also was used on valiant and barracuda with 225 slant six with factory a/c

 

[townsend]

That is correct, all abodies from 63 thru 68 with slant 6 and ac used same pulley. Also all bbodies from 65 thru 68 with slant 6 and ac used pulley #2268665.

 

[John H.]

Thanks.