440 Mike Well-Known Member Joined Jul 18, 2016 Messages 371 Reaction score 178 Location Minnesota Mar 23, 2022 #1 1.094 wrist pin. What should the connecting rod small end measure for a press fit application?
Rat Bastid Dunamis Metron Joined Nov 23, 2020 Messages 4,900 Reaction score 5,508 Location 22 The Avenue Mar 23, 2022 #2 1.084-1.087
pishta I know I'm right.... Joined Oct 13, 2004 Messages 23,822 Reaction score 13,681 Location Tustin, CA Mar 23, 2022 #3 "...Always refer to the rod and piston maker’s specifications. But generally, a press-fit pin requires a .0005- to .0009-in. interference fit between the wrist pin and rod small end..." Performance Perspectives: Connecting Rod Inspection | MOTOR I hate press fit pins...:-(
"...Always refer to the rod and piston maker’s specifications. But generally, a press-fit pin requires a .0005- to .0009-in. interference fit between the wrist pin and rod small end..." Performance Perspectives: Connecting Rod Inspection | MOTOR I hate press fit pins...:-(
440 Mike Well-Known Member Joined Jul 18, 2016 Messages 371 Reaction score 178 Location Minnesota Mar 23, 2022 #4 Thanks for the replies. The small ends are measuring at 1.086, so should be good. This is a a future 440 budget build.
Thanks for the replies. The small ends are measuring at 1.086, so should be good. This is a a future 440 budget build.