Pressure Plate Bolts

-
SMCARNUT

SMCARNUT

FABO Gold Member
FABO Gold Member
Joined
Apr 28, 2018
Messages
856
Reaction score
701
Location
Streetsboro Ohio
Does anyone have the part number for the pressure plate to flywheel bolts on a 10.5 130 tooth flywheel. I tried looking up the part number on the ARP website but did not find one. They list the flywheel to crankshaft bolts but not the pressure plate to flywheel bolts.
 
They are 5\16 bolts ! I keep getting 3\8 ones from everyone i order and flex plate bolts not flywheel bolts good luck
 
Brewers has them...
Brewer's Performance - Mopar A833 4-Speed Transmission and Component Specialists

Bolts.png
 
I live close to Summit and wanted the ARP part number so I could just go and pick them up. For some reason ARP does not list them in their catalog that I could find.
And summit was no help!
 
1501 bolts are 5/16" for the 122 tooth 9.5-10.0" flywheel. 130/143/172 tooth flywheel uses 3/8" bolts
 
SMCARNUT said:
Does anyone have the part number for the pressure plate to flywheel bolts on a 10.5 130 tooth flywheel. I tried looking up the part number on the ARP website but did not find one. They list the flywheel to crankshaft bolts but not the pressure plate to flywheel bolts.
Click to expand...
130-2201 is the ARP part number
 
RustyRatRod said:
You don't use those in what this thread is about. Those are 3/8 16. We're talkin about 5/16 18. That part number Dan shared, although a good number I cannot find anywhere. He didn't mention if they have them or not.
Click to expand...
I thought I read he had a 130 tooth flywheel with a 10.5” clutch? In which Dan specified they were 3/8-16.

I apologize.
 
I honestly need the 3/8 bolts but it good to have the 5/16 bolt part number also.
 
Question- with the ARP do you use factory torque specs for flywheel and pressure plate bolts? Also thread lock on any of them?
 
You must log in or register to reply here.
-

Back
Top