[WANTED] Pressure plate bolts.
- Thread starter circlepilot
- Start date
-
- Status
McLeod Racing 1513
Free Shipping - McLeod Racing 1513 with qualifying orders of $109. Shop Pressure Plate Fasteners at Summit Racing.
Charrlie_S
Well-Known Member
I don't think those are correct. It says they have 1/2 inch head. The slant six with the 10 inch clutch needs the special bolts with the smaller head. If using the "regular" bolts, the disc will drag on the bolt head.McLeod Racing 1513
Free Shipping - McLeod Racing 1513 with qualifying orders of $109. Shop Pressure Plate Fasteners at Summit Racing.www.summitracing.com
Yup, you are right. That's the smallest head bolts I could find.
Brewers has them
www.brewersperformance.com
PRESSURE PLATE BOLT PACKAGE, 10.0" SCALLOPED PRESSURE PLATES - Mopar A833 4-Speed Transmission & Component Specialists
PRESSURE PLATE BOLT PACKAGE, 10.0" SCALLOPED PRESSURE PLATES
www.brewersperformance.com
The bolts need to have a shoulder to align the pressure plate to the flywheel. Brewers Transmission will have the correct bolts. Your flywheel should have a stepped hole for these special bolts. Again you cannot just use a small header bolt. The threads are 5/16 but the shoulder is 3/8 and take a 3/8 lock washer.
I made a post regarding that, but the mods decided it wasn't important and removed it. Thanks for reposting that pertinent information.
Les
Active Member
McMaster-Carr should have them
circlepilot
Well-Known Member
Yep, 3/8" 6 pt socket head.
Norm
- Status
-
