proper torque spec for Edelbrocks..

[stroked 340]

This one is for the engine builders,what is the proper torque spec when using ARP head studs on a smallblock mopar and is the spec different when using oil or moly on the bolts..

 

[moper]

with ARP moly 100 foot pounds. With 30wt oil 125 foot pounds. Dont forget to lube the washer and under the bolt head.. And after you run it a few times, a re-torque should be done.

 

[stroked 340]

with ARP moly 100 foot pounds. With 30wt oil 125 foot pounds. Dont forget to lube the washer and under the bolt head.. And after you run it a few times, a re-torque should be done.

Moper there is no bolt head i'm dealing with studs...

 

[mikedevore]

i think hes talking about under the nut & washer

 

[moper]

your right. Sorry about that.

 

[stroked 340]

Well i talked to ARP fasteners and got the proper torque specs..90lbs when using moly lube...130 lbs with oil...:cheers: