Joeg340
Well-Known Member
Hello All,
I have a 69 340 auto dart. As the title says, I pulled the dash out to paint it and go through the under dash harness. All looked good with the harness, no broken or spliced wires and all connections were cleaned. I have replaced the bulkhead connector as it was suspect. Everything worked before pulling the dash out. I removed the paint from the side of the dash and body to ensure a good ground, cleaned all terminals for the bulkhead and checked to see that all were seated correctly. Where do I start looking?
I have a 69 340 auto dart. As the title says, I pulled the dash out to paint it and go through the under dash harness. All looked good with the harness, no broken or spliced wires and all connections were cleaned. I have replaced the bulkhead connector as it was suspect. Everything worked before pulling the dash out. I removed the paint from the side of the dash and body to ensure a good ground, cleaned all terminals for the bulkhead and checked to see that all were seated correctly. Where do I start looking?