Quick clutch questions

[racingsnake440]

I have a 4 speed out of a '74 Dart sport with stock bellhousing and a 130T flywheel for a 360. Am I right in thinking that if I get the complete clutch I can use either a 10.5" or 10.95" clutch with no problems?

Thinking of getting this McLeod StreetPro:

http://www.summitracing.com/parts/MCL-75109/

Anyone using/used one? Any other good options for a similar price? I don't really want to spend over $200 and don't think I need to as it's only going behind a mostly stock 360 for street use.

Thanks

 

[67valiant 100]

You can use the 10.5" clutch but not sure on the 10.95" clutch.

 

[67Dart273]

10.5 and 10.9 cover use same mounting bolts. If you don't think you need it for HP, I'd go 10.5. The 10.9 came factory in my old 70 RR 440sixpack, and was always a problem child. The disk would "fuzz up" on the outer edge, and drag on the mounting bosses of the cover.

 

[66fs]

I went with 10.95 for more suface area. Never had any problems with mine, but it was holding a 273. I had to grind clearance on the bellhousing where the starter nose pilots inside the bellhousing. You may or may not need to do this but I'd check while it is out.