[SOLD] R2 race block

[Mgc340]

Yes this is an R2 race block
Small block that was made just before the R3’s

48 degree bushes lifter bores
340 mains
Siemese bore
Roller cam bearings
I have a low deck timing cover for it
Bore is 4.175 still have the cross hatches and should be able to run as is.
Deck height I measured was 9.10
Wet or dry sump
4 bolt mains
No motor mounts

$2,800 plus shipping

The guy I bought this from bought this from Kent Ritter years ago and never ran it.

 

[Jadaharabi]

Are all five main journals grooved?
Could you show more pictures?
Do you have an engine mounting plate?
Which heads and intake does this block use?

 

[Mgc340]

Yes all 5 are grooved. I do have a motor plate I would throw in with the block.

You can run w7, w8, or w9 heads and intakes for those heads on this block

 

[jimynick]

Yes this is an R2 race block
Small block that was made just before the R3’s

48 degree bushes lifter bores
340 mains
Siemese bore
Roller cam bearings
I have a low deck timing cover for it
Bore is 4.175 still have the cross hatches and should be able to run as is.
Deck height I measured was 9.10
Wet or dry sump
4 bolt mains
No motor mounts

$2,800 plus shipping

The guy I bought this from bought this from Kent Ritter years ago and never ran it.

View attachment 1716019381

View attachment 1716019382

View attachment 1716019383

View attachment 1716019384

View attachment 1716019385

View attachment 1716019386

View attachment 1716019387

View attachment 1716019388

View attachment 1716019389

Does the $2800 include the repair to the cylinder crack noticeable in the last pic?

 

[Mgc340]

Does the $2800 include the repair to the cylinder crack noticeable in the last pic?

Lol funny guy. Have to love key board cowboys. It’s not cracked wise guy. The cylinder is dirty and it has a scratch from my caliper. You interested in the block or just chirping your mouth?

 

[Mgc340]

It’s not cracked

 

[71GSSDemon]

To be fair to @jimynick it does look like a crack