[FOR SALE] R3 Race block and rotating assembly and W 9 heads

[Mark69cuda]

I have a R3 Race block that was prepped by Ray Barton 10 years ago and never put together.It is bored 4.125 and comes with a mopar performance 379 forged crank and comes with Pistons rings,bearings .cam bearings already installed .I also have a bullit timing chain. I have a roller cam from cam dynamics .I will have to find the specs. This would be a 405 cubic inch motor $6500 .I also have a set of mopar performance W9 castings for $500

 

[Ckeely]

Do you know what compression ratio your pistons are designed to create

 

[jimjimjimmy]

is this a 59 degree block or 48 .

 

[Mark69cuda]

Do you know what compression ratio your pistons are designed to create

I was figuring on 11.1 on pump gas

 

[rumblefish360]

What is the blocks part number?
Are the W9’s 48 or 59 degrees?

 

[Mark69cuda]

What is the blocks part number?
Are the W9’s 48 or 59 degrees?

I sold the W9s .The block is 673 and P4532909

 

[rumblefish360]

I can’t find that number in the catalog

 

[Mark69cuda]

I can’t find that number in the catalog

 

[rumblefish360]

is this a 59 degree block or 48 .

Bump

 

[Mark69cuda]

It is a 48 degree Siamese block

 

[Mark69cuda]

Bump

It is a 48 degree Siamese block