race Demon getting a new coat of paint

[pioneerp]

http://s39.photobucket.com/albums/e...ew paintjob/?action=view&current=CIMG3932.jpg

Switched to all glass front end and doors. Only had rust in the rocker seams. Cowl was a mess and A-pillars were stress cracked. 960HP will do that!!

Car will weigh approx 2250# without me.

Mike

 

[pettybludart]

WoW!!That,s a cool ride and on the lite side.What,s she run at the track??

 

[pioneerp]

Last yr I was 100#s heavier and had issues with the Koni shocks, carb and valves springs I ran 8.7s.@ 155 with a soft 1.24 60ft.
This yr I expect big improvments. The motor is freshened, new BME Rods, ProSytems carb. and 350# seated valve springs versus 250# that were starting to float at 7500rpm.
Hopefully 1.15 60's (this is lot of hope!!)
8.5's on the big end @ 160.
In two yr's I'm going sevens!
Mike

The chassis is a Brad Hadman chassis, he didn't make many. But 1/2 the top fuel dragsters including Schumacher are running Hadman chassis. His chassis shop is near my fab business

 

[Burntorange70]

WOW! Nice car.