[SOLD] Radiators, AC components, and driveshaft

[swinger]

Pulled from two 1970 Darts:View attachment 1715985091View attachment 1715985092View attachment 1715985093View attachment 1715985094View attachment 1715985095
Radiator SOLD (the one pictured on the left)
Radiator pictured with shroud $20 (NOTE: shroud was already SOLD separately)
All AC components shown $30 (NOTE: the under dash vents are sale pending)
Drive shaft $30
Located in Fremont, CA

 

[MidnightSwinger]

Specs on the driveshaft?

 

[swinger]

Wish I knew....
One of the cars I had was a slant six automatic with 8-3/4 rear, the other was a 340 4 speed with 8-3/4 rear.
Not sure which car this was from.
Let me know specifically what I can measure for you to help identify this part.

 

[MidnightSwinger]

Measure from the center of each yoke.

 

[MidnightSwinger]

Here is a better description

 

[Jim Ward]

Will you sell just the shroud? If so I’ll take it.

 

[swinger]

Will you sell just the shroud? If so I’ll take it.

PM sent

 

[71 swinger 225]

Pulled from two 1970 Darts:View attachment 1715985091View attachment 1715985092View attachment 1715985093View attachment 1715985094View attachment 1715985095
Radiator $20
Radiator with shroud $30
All AC components shown $30
Drive shaft $30
Located in Fremont, CA

Pm sent on radiator with shroud

 

[fnabody]

What's the number on the top tank on the radiator with the shroud and the part number on the shroud?

 

[Surprise67GT]

I am interested in the AC components. Would shipping be a possibility?

 

[Surprise67GT]

Your inbox is full. You can’t receive new messages

 

[swinger]

Measure from the center of each yoke.

Looks to be about 51-3/4”

 

[swinger]

What's the number on the top tank on the radiator with the shroud and the part number on the shroud?

Radiator looks to be a replacement with no Chrysler numbers.
Shroud is chrysler #2998324.

 

[swinger]

I am interested in the AC components. Would shipping be a possibility?

Possibly yes. Where to?
I'd need to find a box that will work, then pack and weigh to get you a quote.

 

[MidnightSwinger]

Looks to be about 51-3/4”

How about the diameter of the tube? Is there anytaper? Might be what I need!

Thanks again,
Jared

 

[swinger]

How about the diameter of the tube? Is there anytaper? Might be what I need!

Thanks again,
Jared

Main body is about 2-3/4" diameter. The ends are as pictured here:

 

[fnabody]

Radiator looks to be a replacement with no Chrysler numbers.
Shroud is chrysler #2998324.

Ok thanks. That is a slant 6 radiator shroud

 

[MidnightSwinger]

Main body is about 2-3/4" diameter. The ends are as pictured here:
View attachment 1715985304 View attachment 1715985305

That’s the slant six,8 3/4 one. Someone swapping a slant car will want it, but I need a 3” or bigger for my 383. Thank you for the measurements.

 

[swinger]

Ok thanks. That is a slant 6 radiator shroud

That one came out of a running/driving car with no known issues.

 

[Surprise67GT]

Possibly yes. Where to?
I'd need to find a box that will work, then pack and weigh to get you a quote.

Shipping for the air conditioning parts would be two Bolton, CT 06043

 

[swinger]

Shipping for the air conditioning parts would be two Bolton, CT 06043

PM sent

 

[70dusterA62]

I take driveshaft zip code 95843

 

[swinger]

I take driveshaft zip code 95843

Any chance you'll be in the Bay Area any time soon to pick it up in person?; save me the shipping hassle and you the shipping cost? If not, I'll pack/weigh it and get you a quote.

 

[70dusterA62]

I am truck driver I usually go oakland to drop or pick up one of location on any one of terminals evergreen or shippers or ampco yard

 

[swinger]

I am truck driver I usually go oakland to drop or pick up one of location on any one of terminals evergreen or shippers or ampco yard