re-quartered?

[plumcrazy704406]

looks like it has been. What do you think?

 

[1968FormulaS340]

Looks like it could have been, but the better question is when?

I mean, it could have been re-quartered in 1971.

Then again, production line quality was fairly sloppy and crude back then.

 

[slantscamp]

cant tell from the picture, but i can see they didnt pull the rubber when it was repainted.

 

[plumcrazy704406]

another,

In another photo the pass.fender has been replaced, but I didn't expect the inner to be. Looks like it might have had a hard hit on the pass.side, although the rail looks ok.

 

[Top Heavy]

Me too!

I'll have pics up when I get further along in the build.

Found out tonight that plasma cutters don't like sand from being blasted at some point between panels that were welded on top of each other.

All I thought I really had to deal with was a little impact on the front passenger side, and replace the torsion bar crossmember; the more I take off the more I'll need to replace.........

 

[plumcrazy704406]

http://s517.photobucket.com/albums/...uda/?action=view&current=S50055351280x768.jpg

 

[plumcrazy704406]

Looks like it could have been, but the better question is when?

I mean, it could have been re-quartered in 1971.

Then again, production line quality was fairly sloppy and crude back then.

ttt

have a look at at the 140+ photos sent to me and give your best and worst opinions. whats it worth to you?

 

[rjsjea]

Paint job looks pretty sloppy, looking at the door jamb I'd say the quarter or jamb area was replaced/worked on at some point in its life

 

[xlexl]

Join the club, at some point in time mine got smacked hard enough to crack the brazing for the roof on the c-pillar, and crease up the firewall and floor pans. Hope the unibody was straightened, I don't have the heart to throw it on a frame rack and find out.