[WANTED] Rear Window Hinge Spring

[gunmetal72]

Not sure what it is really called but I need the little flat spring that holds the rear window open on my Duster. It is held in place by small screw. Mine was week and I tried to bend it a little just to put more pressure on the hinge and broke it. I tried to make one but can't get enough pressure on the hinge, I believe it is a flat piece of spring steel. Was hoping someone might have one.

 

[Dana67Dart]

Post a photo of what you have and what you are looking for

 

[cudamark]

Are you speaking of a part in the quarter window latch?

 

[gunmetal72]

Are you speaking of a part in the quarter window latch?

Yes it is on the rear window, first pic is the part I need, 2nd pic shows where it goes, Circled in red.

 

[Dana67Dart]

And it is spring steel?

 

[gunmetal72]

And it is spring steel?

ya, I think

 

[Dana67Dart]

You could try getting a strap from a pallet and cut and form a piece!

From the thickness of it it might just be flat stock that is formed and tempered.

 

[gunmetal72]

You could try getting a strap from a pallet and cut and form a piece!

From the thickness of it it might just be flat stock that is formed and tempered.

Might have to give that a try if no one has one.