Rear Window trim moulding for a 68 Notchback

[smrcuda]

I am trying to locate rear window trim moulding for my 68 Notchback. I have the gasket with a slot- not clips. Does anyone have anything laying around or know of someone who might? I could also use windhield moulding. Some of it is beat up.
I have been living with it to this point. These items would make my restoration nearly complete.

Feel free to call or email me.

[email protected]
330-844-1212

Thanks in advance for the help
Steve

 

[RedFish]

All I have is info that may help. 68 and up had a stainless trim (reveal moulding) that was held on with clips. That rubber gasket had lips that fold and interlock. If you have the 67 type gasket you could put a round lock cord in it after you install the clips for the trim but... that gasket has a taller profile. The stainless trim doesn't lay over it right. You may get a wind noise (whistle).
Same details apply to the front gaskets and trim.
The only difference in trim for 4 door a-body windshiled moulding through 76 model is the A-pillar sticks are 2 inches longer. Easy enough to chop off for 2 door model use. Good luck.