[WANTED] Rear.

[cuda620]

ISO 8.75 or Dana 60 to fit an A body. No B bodies please. Already have wheels with 4.5” backspacing. Prefer near Indiana. Prefer sbp or buy it with no axles and I’ll get mosers. Already found one from what seems to be a really nice guy. Just tryin to save he and I a drive. Thanks

 

[krazykuda]

I have an A-body 8 3/4" axle housing and axles in SW Chicago, just 22 miles inside the Illinois/Indiana border... PM me for price if interested...

 

[Oldmanmopar]

I have a housing a-body.Also park brake lever , strut . and backing plates for Big bolt which you will need. Unless you have big bolt rears you can rob those parts off of. If you have these parts you only need a bare housing for an a-body.

None of the a-body parts from the backing plate out will work with 4 1/2 bolt pattern. I have a bare housing that will need to be blasted. $150.00 you pay shipping on your end with truck freight. PM me if interested

 

[cuda620]

I’m staying with the sbp. Will any of your parts work other than the housing. Swapping out the 7.25. Blasting on inside and out or just out? Thanks

 

[Oldmanmopar]

I thought you said 4 1/2 BP You said back space. I have The backing plates and hardware for sbp. Also Axles. 67 or 68 -72 They're different. 67's do not have the balance holes in the flanges. But Moser would be your best bet for axles. Shipping would be high. We had a race in Indiana 11 hrs. one way

 

[cuda620]

Yes it 4.5 backspacing. 15” sbp wheels. I’m taking out a 67 7.25 rear. 11 hours is a long ways for racing. Wow!

 

[cuda620]

I have an A-body 8 3/4" axle housing and axles in SW Chicago, just 22 miles inside the Illinois/Indiana border... PM me for price if interested...

Pm’d