My current, and very last pair, of A body LCA's that i have in stock, and for sale.
These are a pair of rebuilt lower control arms with sway bar mount tabs on them that are used on 1965-72 A-body cars such as Duster, Dart, Demon, Valiant, Scamp, and the early 1st and 2nd generation 1965 to 1969 Barracuda's.
I recently found this pair on a 1968 Dodge Dart, but officially are for any A body car using a sway bar, from the 1965 model year until the 1972 model year. The sway bar mount tab is in a different location on the 73 and later A body cars.
These control arms will fit and work, on any A body car from 1962 until the 1976 model year. It's where the sway bar mount tab is located on the LCA, that make them year specific to the A body line of cars.
I have cleaned these control arms of 48 years of grease and grime, plus they have been cleaned of all the surface rust in a product called Evaporust. You paint them with whatever texture, and color of paint that you prefer.
These control arms are not rust pitted pieces of junk like you find in the rust belt states here in America. These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale.
I installed new control arm busings from the NAPA store that i deal with locally. The rebound bumpers are in excellent shape, and i didn't have to replace them. The bushings alone cost me near $30.00, so if you factor in my labor time what it took me to bust these things off a car in the wrecking yard, initially paying for them, cleaning them up, buying the bushings, doing the press work on the bushings, i need to see $275.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done. I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $120.00 + an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here on eBay. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.
$275.00 for the parts, plus FEDEX'ing to your zip code, with insurance, and signature delivery charges applied.
Payment will be thru Pay Pal with their 3% fee.
If your a serious buyer for these LCA's of mine, send me a pm thru this forum.
Or.
Nine One Six, Eight Five Two, One Seven Five Eight.
During the evening time hours of 5:30 - 7:30 pm (Pacific time)
Thank's a lot
Jim V.
hemi71x
These are a pair of rebuilt lower control arms with sway bar mount tabs on them that are used on 1965-72 A-body cars such as Duster, Dart, Demon, Valiant, Scamp, and the early 1st and 2nd generation 1965 to 1969 Barracuda's.
I recently found this pair on a 1968 Dodge Dart, but officially are for any A body car using a sway bar, from the 1965 model year until the 1972 model year. The sway bar mount tab is in a different location on the 73 and later A body cars.
These control arms will fit and work, on any A body car from 1962 until the 1976 model year. It's where the sway bar mount tab is located on the LCA, that make them year specific to the A body line of cars.
I have cleaned these control arms of 48 years of grease and grime, plus they have been cleaned of all the surface rust in a product called Evaporust. You paint them with whatever texture, and color of paint that you prefer.
These control arms are not rust pitted pieces of junk like you find in the rust belt states here in America. These are one of the nicest pairs of lower control arms that i have come across, and rebuilt for re-sale.
I installed new control arm busings from the NAPA store that i deal with locally. The rebound bumpers are in excellent shape, and i didn't have to replace them. The bushings alone cost me near $30.00, so if you factor in my labor time what it took me to bust these things off a car in the wrecking yard, initially paying for them, cleaning them up, buying the bushings, doing the press work on the bushings, i need to see $275.00 for these parts. If you don't know how to rebuild these lower control arms it can be a pain in the butt to get them done. I have a shop hydraulic press, and the factory tools to get these done correctly. Shop labor rates are $120.00 + an hour where i'm at, and if i charged you 1/4 that it would be low. I have already done all the hard, dirty work for you. This is what i do as a professional auto mechanic, to help pay the bills in this life on planet earth, and to support my other hobbies, and buying other things here on eBay. I can't pay my rent, go to the gas station, or grocery store, working for free, or minimum wages.
$275.00 for the parts, plus FEDEX'ing to your zip code, with insurance, and signature delivery charges applied.
Payment will be thru Pay Pal with their 3% fee.
If your a serious buyer for these LCA's of mine, send me a pm thru this forum.
Or.
Nine One Six, Eight Five Two, One Seven Five Eight.
During the evening time hours of 5:30 - 7:30 pm (Pacific time)
Thank's a lot
Jim V.
hemi71x
Last edited:
