Nov 19, 2019 #1 C coffeedart67 Well-Known Member Joined May 9, 2010 Messages 1,200 Reaction score 66 Location Southeast South Dakota How do I remove the back from bucket seats in a 67 Dart? Thanks Aaron
Nov 19, 2019 #2 Alaskan_TA Well-Known Member Joined Nov 12, 2004 Messages 6,415 Reaction score 5,314 Location PA If they are the same as a '68...... Flip seat back forward. Remove the two screws in the base / bottom flange. Gently pull the seat back panel down, then out.
If they are the same as a '68...... Flip seat back forward. Remove the two screws in the base / bottom flange. Gently pull the seat back panel down, then out.
Nov 19, 2019 #3 4spdragtop FABO Gold Member FABO Gold Member Joined Aug 28, 2009 Messages 44,251 Reaction score 28,978 Location Ontario Parts Unknown Heres pic from our 67 cuda. Zoom in and you can see screw holes on bottom, and 2 "grabs" on panel. Not sure if darts are the same.
Heres pic from our 67 cuda. Zoom in and you can see screw holes on bottom, and 2 "grabs" on panel. Not sure if darts are the same.
Nov 21, 2019 #4 C coffeedart67 Well-Known Member Joined May 9, 2010 Messages 1,200 Reaction score 66 Location Southeast South Dakota Ok, thanks. Will give it a try tomorrow.