Replacement pins for 68 rallye dash main circular electrical connector?

[Brendan Moroney]

anyone know where these can be obtained?

 

[g413]

If you just want a few, probably someone on this site has them. Then you have to mount them firmly. I've got an old board and the pins are pretty loose. The whole circuit board with the pins has been reproduced. Try Classic Industries part #MA118509. Cost is $125.
Mopar Parts | MA118509 | 1967-71 Mopar A-Body With Rallye Gauges Dash Circuit Board; LH | Classic Industries

 

[Brendan Moroney]

im looking for the harness side female pins or replacement connector if anyone reproduces them.

 

[RedFish]

I don't recall ever seeing a need for those. Anyway... I suppose Rhode Island Wiring Service Inc. will have them.

 

[skykeith]

Molex sockets can be used in the instrument cluster connector. Part nos. 02-09-1119 for 18-22 ga. wire and 02-09-1104 for 14-20 ga. wire. They are virtually identical to the OEM sockets. The round connectors were used until the 80s in vans, the last time I needed one, I went to the Pull-A-Part and got one out of a van. I've repaired some butchered harnesses by de-pinning the connector and running new wires with Molex sockets.