Rotisserie
- Thread starter four_gear
- Start date
-
I built my own. Here's a link to the plans I used:
http://www.mts.net/~hpokrant/Restoration_Tips/1-Rotisserie/Rotisserie.htm
http://www.mts.net/~hpokrant/Restoration_Tips/1-Rotisserie/Rotisserie.htm
I built my own. Here's a link to the plans I used:
http://www.mts.net/~hpokrant/Restoration_Tips/1-Rotisserie/Rotisserie.htm
That link took me back!
Grew up in the same small town as the owner of that page. The purple '70 Cuda mentioned on his home page was quite the terror of the town and I'm pretty sure his Camaro was spanked pretty badly well before the 80 mph mentioned.
http://www.mts.net/~hpokrant/index.htm
Rice Nuker
Let the Coal Roll!
That is a great rotisserie. Also thank you for the link!
Rice Nuker
Let the Coal Roll!
Do you have a welder and access to some square tube metal?
https://store.uscartool.com/Auto-Body-Rotisserie_c_9.html
shipping included build your own using this kit and some cuts of square tube that you get yourself.
375 out the door.
if you want I can post some pics of it completed in a couple weeks cause I just ordered it.
https://store.uscartool.com/Auto-Body-Rotisserie_c_9.html
shipping included build your own using this kit and some cuts of square tube that you get yourself.
375 out the door.
if you want I can post some pics of it completed in a couple weeks cause I just ordered it.
vitamindart
Well-Known Member
built one out of square tubing a buddie got for me and a couple pieces of threaded rods
(for balance adjustment) look at some on You Tube and you will see how easy it is to build it yourself. much easier to spin and lock it yourself if you have a way to balance the weight. i can spin mine to just about any spot and it will stay by itself...
(for balance adjustment) look at some on You Tube and you will see how easy it is to build it yourself. much easier to spin and lock it yourself if you have a way to balance the weight. i can spin mine to just about any spot and it will stay by itself...
curtmaxwall
Member
What after making rotisseries? Means, in factory shop rotisseries are being passed from various solutions to make its body strengthen.
Try re-writing that in English...:shock:
too funny!!!
Mopar Al on this site builds the best rotisseries..... But I am partial since he built me one and when he works on my car for me he mounts my car on his at his garage... So I have seen and used it a lot. PM him...
Rice Nuker
Let the Coal Roll!
OR uhh, a couple months..
The US Car Tool kit is a little weird in my opinion. I decided to go alot heavier on most the specs. I would not recommend the kit so much, now that I have gotten into it.
My Rotisserie thread:
http://www.forabodiesonly.com/mopar/showthread.php?t=196677
The US Car Tool kit is a little weird in my opinion. I decided to go alot heavier on most the specs. I would not recommend the kit so much, now that I have gotten into it.
My Rotisserie thread:
http://www.forabodiesonly.com/mopar/showthread.php?t=196677
drive48
MILK MAN
ours is home made we used acme threaded rod for balance adjusters.
-
