[SOLD] Saturday Nite Parts Cleanout

[j_anderson]

#4 please

 

[plymouth67]

I would be up for the 34 tooth count speedo gear...PM me total cost and PayPal info

Thanks!!

 

[RAT ROD AL]

You beat me to it by 15 mins

Kevin , I talked to Eric and he says you can have the oil filter plate & gaskets. !

 

[Dicer]

Al I would take picture #1 two of the fan spacers..... 1" & 2 1/2" thanks

 

[dartfreak75]

Kevin , I talked to Eric and he says you can have the oil filter plate & gaskets. !

Pm sent

 

[rustycowll69]

Rusty, are you interested in this or just letting me know I needed a $$$. another member wants it.

Yes, interested. Need shipping costs to 98042.

 

[RAT ROD AL]

OK! I'll get you a quote in a few minutes. Thanks Al

 

[RAT ROD AL]

Thank you. If it’s for a 727 I will take it.

It's for a 904. Sorry

 

[Righty Tighty]

It's for a 904. Sorry

No problem, thanks for checking!

 

[RAT ROD AL]

Yes, interested. Need shipping costs to 98042.

Your box is full. Please PM me for your shipping quote

 

[RAT ROD AL]

could not find big cover in my parts cd but will look in reg parts book tomorrow. thinking they are same as they are just dust/rock shields. been too many beers ago. removing small cover allows person to drain convertor with out removing starter, braces, if equipped and shield. it takes a diff conv cover than normal.

Thanks rbkt but I got it figured out !

 

[Rapid Robert]

I'll take #12 (trans braces)

 

[RAT ROD AL]

I'll take #12 (trans braces)

Not trans braces, they're lower radiator support to K frame brace..but I may have some .

 

[RAT ROD AL]

Yes, interested. Need shipping costs to 98042.

Sorry , but moving on to second in line. Due to no response.

 

[RAT ROD AL]

Next on #9 after rustycowl. Also is the inspection cover in #12 for a 904 or 727?

Mike ! You're up on this if still interested.

 

[Righty Tighty]

Sent pm.