SB TTI's, Dougs- Question

[mopowers]

Before I mount my adjustable proportioning valve, I want to make sure it won't interfere with the TTI's or Dougs I plan to install in the future. I plan on mounting it about 6-8" down from the original prop. valve on my 68 Dart.

Will there be any interferance with either one of these headers? Can you guys with tti's or dougs post a pic of the underside of driver's side just so I can get an idea of how they're run???

Thanks!

 

[mopowers]

Bump. Any under side shots of your A bodies with either the Doug's or TTI step headers???

 

[crackedback]

If down means towards the rear, further back you go to a point the more room you get from your headers. 12" would likely be better than 6-8".

 

[65-440]

Hope this helps, best i could do without jacking car up !

 

[mopowers]

Hope this helps, best i could do without jacking car up !

Thank a lot! That helps a ton! Looks like I'll be mounting it near trans crossmember. Those are TTI's right???

 

[65-440]

Yes they are TTI, glad i could help !