[SOLD] Schumacher Chrome Tri y headers B/Rb

[Bigboy 68]

brand new in the box Schumacher Chrome Tri y big block headers for A body these headers have the 4-speed modification done in stainless steel asking 635 plus shipping

 

[63spf]

brand new in the box Schumacher Chrome Tri y big block headers for A body these headers have the 4-speed modification done in stainless steel asking 635 plus shipping

Inbox is full, pm me

 

[cuda620]

Did you have it rechromed? If not,it’s not anymore...

 

[Bigboy 68]

Did you have it rechromed? If not,it’s not anymore...

I don't know what you mean they are brand-new in the Box and the modification was done in stainless steel and welded with stainless wire no rechroming needed

 

[cuda620]

Who did the modifying? Perhaps I’m mistaken.

 

[Bigboy 68]

Who did the modifying? Perhaps I’m mistaken.

a good friend of mine who is a welder and fabricator and has been building street rods for 45 years

 

[cuda620]

Sorry even if tig or mig welded on, and in stainless,it’s still welded and not the same. Looking for Schumacher’s but will pass. Wait for others or their big December sale. Thanks.

 

[Bigboy 68]

Sorry even if tig or mig welded on, and in stainless,it’s still welded and not the same. Looking for Schumacher’s but will pass. Wait for others or their big December sale. Thanks.

well to make the modification for a 4-speed you have to weld on it it doesn't even look like a modification has been made if you didn't know the difference between the Chrome and the stainless

 

[Bigboy 68]

pics as requested all the hardware and collectors are also in the Box

 

[cuda620]

Did your welder connect a slip tube with the weld? Did he weld it with stainless wire too? MiG or tig weld? Looks like a good job.

 

[Bigboy 68]

Did your welder connect a slip tube with the weld? Did he weld it with stainless wire too? MiG or tig weld? Looks like a good job.

he tig welded it with stainless wire to

 

[oldkimmer]

Looks like an awesome job. Kim

 

[awohlers]

Are these still available? Did he modify these so you could use a standard Z bar?

 

[Bigboy 68]

yes it was modified to run a factory z bar
these are sold