seat belt question
- Thread starter bballfan1
- Start date
-
TrailBeast
AKA Mopars4us on Youtube
If black I use satin black Rustoleum spray for trim parts because it looks so natural.
Rit dye is about the best option for belts I have ever seen.
A pan of water on the stove with the belts and dye in it works great, and it's cheap to do.
As a mater of fact I'm going to be doing some in my own car one of these days, because I have some red harness belts that faded, and the dye makes them nice and bright again.
Rit dye is about the best option for belts I have ever seen.
A pan of water on the stove with the belts and dye in it works great, and it's cheap to do.
As a mater of fact I'm going to be doing some in my own car one of these days, because I have some red harness belts that faded, and the dye makes them nice and bright again.
Snake
Mopar Nut
Greg is right about the Rit dye,I did my old blue ones on the Dart look great but had to get 2 boxes, to get the black look,in your case Greg, red to black be ready you may need more than 3 boxes.
TrailBeast
AKA Mopars4us on Youtube
I'll be redoing the red harness belts red again, and the OEM black belts are in good condition so I won't be changing colors.
But thanks for the heads up.
zkx14
Duster De-ruster
I ve been painting plastic trim pieces with Krylon Dual. Goes on nice and seams to be a fairly tough finish.
For belts, check out build thread by AIV. http://www.forabodiesonly.com/mopar/showthread.php?t=254194&page=20 He just did his black belts and they look great!
For belts, check out build thread by AIV. http://www.forabodiesonly.com/mopar/showthread.php?t=254194&page=20 He just did his black belts and they look great!
Snake
Mopar Nut
Ya I finish my just the same turned out GREATTTTTTTTTTTTTTT.Krylon Duel Ivory.
For the plastic backs clean them really well & use an adhesion promoter. Here's my before & after pics....
TrailBeast
AKA Mopars4us on Youtube
-
Similar threads
