Show Us Pictures of 2nd Generation Barracudas

Ma Snart · Mar 12, 2015

d100clubcab said:
Texas license plates and Texas registration and inspection stickers in the driver's side of the windshield that expire in 2015

Cool car tho.
I always love to check in on this post and I thank you for starting it
At first I didn't like the 2nd gen Cuda too much but it has grown on me and this post was a great help for that.
Some real gems in here

Hey D100ClubCab! Glad you are enjoying the thread.

The reference to Florida was where I was, not where the car was from. Always amazes me how close you guys look at the pics.

Nice to get the positive feedback...

Ma Snart

451Cuda · Mar 12, 2015

Found these today

[ame="https://www.youtube.com/watch?v=MejowRRBfok&index=4&list=PLS5B92pyGvbgjklni6oGL0plVo_4ju8TJ"]1967 Plymouth Barracuda Commercial - YouTube[/ame]

[ame="https://www.youtube.com/watch?v=i6_op_jkc6w&index=5&list=PLS5B92pyGvbgjklni6oGL0plVo_4ju8TJ"]1967 Plymouth Barracuda Commercial - On the prowl withh Edye Gorme - YouTube[/ame]

SteveDodge · Mar 13, 2015

epic thread!!!

here's my barracuda.

Ma Snart · Mar 14, 2015

SteveDodge said:
epic thread!!!

here's my barracuda.

Thanks for posting. Factory AIR - Cool fish - LOL!

Is that your bad *** dart in your photo bucket?

Ma Snart

Ma Snart · Mar 14, 2015

451Cuda said:
Found these today

1967 Plymouth Barracuda Commercial - YouTube

1967 Plymouth Barracuda Commercial - On the prowl withh Edye Gorme - YouTube

Those are great finds. The late 60's were a unique time...

Ma Snart

1968FormulaS340 · Mar 14, 2015

Mine at the local car show, last summer.

Bob67Barracuda · Mar 14, 2015

Unseasonably early start to the fishing season here in MN, so we threw open the garage today and got this shot.

Probably an old joke, but here goes:

"Cat fish"

Ma Snart · Mar 16, 2015

Thanks for the latest pic of your nice yellow fish, 1968FormulaS340.

Cat fish - LOL!

And for Monday...

Ma Snart · Mar 17, 2015

St Patty's fish...

1969383S · Mar 18, 2015

Ma Snart said:
St Patty's fish...

Eye Popping Green Ma!

Easy day for me to remember the misses and my anniversary.

We have had some nice weather in N.Ga finally got around to that wheel molding. Trunk finish panel next once I decide which one to use.

Enjoy a quick ride if you can get over the gear and or bearing noise. Still pondering that.

Least the motor and trans held up all these years.

[ame]https://youtu.be/Ik1AMNP68xk[/ame]

Ma Snart · Mar 19, 2015

1969383S said:
Eye Popping Green Ma!

Easy day for me to remember the misses and my anniversary.

We have had some nice weather in N.Ga finally got around to that wheel molding. Trunk finish panel next once I decide which one to use.

Enjoy a quick ride if you can get over the gear and or bearing noise. Still pondering that.

Least the motor and trans held up all these years.

https://youtu.be/Ik1AMNP68xk

Hey 1969383sS!

That green would wake your *** up in the morning when you enter the garage, LOL!

Great to see some more pics of your nice 69. It was really cool to take a backseat ride with you in it. Awesome...

Thanks for posting...

Ma

Ma Snart · Mar 19, 2015

And on today's menu we have, fish...

Ma Snart · Mar 20, 2015

Another topless fish for your viewing pleasure...

MobileCustoms · Mar 20, 2015

A little bit of Photoshop Plames for Phun

SilverfishX · Mar 20, 2015

Pics from a race last weekend...Qualified #2 out of 24 with a 4.92 @ 140mph at a jet limited race...Lost when it did a wheelstand in the semis !!

Ma Snart · Mar 21, 2015

MobileCustoms said:
A little bit of Photoshop Plames for Phun

I like the flames. You do not see too many fish with them. Going to make them real?

Ma

craigerlitz · Mar 21, 2015

Southern sun baked fish

Ma Snart · Mar 21, 2015

SilverfishX said:
Pics from a race last weekend...Qualified #2 out of 24 with a 4.92 @ 140mph at a jet limited race...Lost when it did a wheelstand in the semis !!

Great pics and times. Congrats...

Thanks for posting, look forward to more...

Ma

RangerRick · Mar 21, 2015

1969383S said:
Eye Popping Green Ma!

Easy day for me to remember the misses and my anniversary.

We have had some nice weather in N.Ga finally got around to that wheel molding. Trunk finish panel next once I decide which one to use.

Enjoy a quick ride if you can get over the gear and or bearing noise. Still pondering that.

Least the motor and trans held up all these years.

https://youtu.be/Ik1AMNP68xk

nice car, good video, I have the same problem as you with the whine in the diferential, started when I changed from 4.10 to 4.56 gears....mechanics said it needed to break-in?
mine is slightly worse than yours, its annoying.................at least the weather was good hey..

1969383S · Mar 21, 2015

RangerRick said:
nice car, good video, I have the same problem as you with the whine in the diferential, started when I changed from 4.10 to 4.56 gears....mechanics said it needed to break-in?
mine is slightly worse than yours, its annoying.................at least the weather was good hey..

RangerRick

Mine are 4.56 as well, I just do not remember them being that noisy. It was 1988 last time I drove it so maybe it just slips my memory. Ma Snart may chime in, his stout looking B'Cuda is a racer I believe and most likely has some steep gears in it.

wannadrag · Mar 22, 2015

Round 2 of high build,block sanding sucks by the way.

Ma Snart · Mar 24, 2015

wannadrag said:
Round 2 of high build,block sanding sucks by the way.

You have more patience than me. Look forward to more progress update pics.

Ma

Ma Snart · Mar 24, 2015

1969383S said:
RangerRick

Mine are 4.56 as well, I just do not remember them being that noisy. It was 1988 last time I drove it so maybe it just slips my memory. Ma Snart may chime in, his stout looking B'Cuda is a racer I believe and most likely has some steep gears in it.

Here are the drive axle specs on my fish. Gears are not as deep as yours. Do not remember hearing any rear end noise like yours, but the engine is so damn loud I couldn't hear much of anything anyway - LOL!

Driveshaft - 3 Inch DIA Pro Package 1350 Series w/ U-Bolts
Rear Axle - 9-3/4 Strange 60 (Dana 60) Model PRSL15
Rear Axle Ratio - 4:30 Pro Gears
Differential - Pro Spool
Rear Cover - Aluminum
Rear Axles - 40 Spline Solid SFI Foraged Race Axles
Wheel Studs - 5/8 Inch

Ma

1969383S · Mar 24, 2015

Ma Snart said:
Here are the drive axle specs on my fish. Gears are not as deep as yours. Do not remember hearing any rear end noise like yours, but the engine is so damn loud I couldn't hear much of anything anyway - LOL!

Driveshaft - 3 Inch DIA Pro Package 1350 Series w/ U-Bolts
Rear Axle - 9-3/4 Strange 60 (Dana 60) Model PRSL15
Rear Axle Ratio - 4:30 Pro Gears
Differential - Pro Spool
Rear Cover - Aluminum
Rear Axles - 40 Spline Solid SFI Foraged Race Axles
Wheel Studs - 5/8 Inch

Ma

Thats not far off the 4.56!
Definitely stout like I assumed!

Dave1967 · Mar 24, 2015

It took me two years from start to finish.

Show Us Pictures of 2nd Generation Barracudas

Well-Known Member

Attachments

Well-Known Member

Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Proud Conservative

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

You can twist perceptions, reality won't budge

Attachments

Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Proud Conservative

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Attachments

Proud Conservative

Cuda crazy

Attachments

Similar threads