show us your champion radiator installed

[67barracuda]

I am trying to decide which one to purchase for my barracuda and it looks like a few different ones will work. It would help me and I believe others if you could post a pic of your radiator installed and the part number.
Thanks

 

[70DartMike]

Ahh, can't remember the part #, but its stock A body width. In a 70 Dart with a 340.

 

[68er]

This is my 3 core Champion Rad with Crome overfill

 

[waggin]

ok

 

[doogievlg]

not trying to hijack your thread here but is that a car a wheel stander?

 

[67barracuda]

Thanks for the photos and keep them coming to help others.
I decided to ordered a 3 row #1635 from Gary, which I will post pics of it installed with my new motor in the car.

 

[Chameleon]

Mine is a 26" 4 core with the fan/shroud option. I could not use the shroud because of my pulley setup but plan to make a little more room and install it before summer gets here.

 

[mopardude318]

how are you guys fitting the 26 inch wide radiators in the A-body? In my 68 cuda, i have an Afco cross flow with the tanks on the side...the cores measure 20 inches across by 17.5" in height. i guess overall length is 25 inches including the tanks..

Are you guys cutting the opening larger, and moving the battery?

 

[Prine]

1974 Duster 360.....AC Car
26" 3 core Champion Radiator

Fits Good.

 

[waggin]

its a champion radiator mounted to my wheelstander??? last I checked??

not trying to hijack your thread here but is that a car a wheel stander?

 

[waggin]

I cut everything.....it fit's now ;)

how are you guys fitting the 26 inch wide radiators in the A-body? In my 68 cuda, i have an Afco cross flow with the tanks on the side...the cores measure 20 inches across by 17.5" in height. i guess overall length is 25 inches including the tanks..

Are you guys cutting the opening larger, and moving the battery?

 

[mopardude318]

lol